DVI CABLES @ Discount Prices -CLICK HERE

DVI Cable Q&A

1) What is the difference between Dual Link and Single Link?
Dual link enables a higher resolution and three additional channels. Most users can substitue a Dual Link for a Single Link Cable.

2) I need a DVI-I to DVI-D cable - What part number do I buy?
You can purchase any DVI-D to DVI-D Cable as that is what you will be using.

3) Why are your DVI cables so inexpensive?
They are made offshore where labor is Inexpensive. We are the importer. We sell alot of them.

4) Is there a distance limitation?
Yes and No. For digital DVI cables there is a 5 Meter distance limitation which can be broken with Extra High Quality Cable.With that said some cards do not even work upto 5 Meter..

5)Tell me about the Digital Interfaces available?
Currently there are three digital interface standards (P&D, DFP, and DVI) in the market. DVI is becomming the defactor Standard in the industry.

Standard P&D DFP DVI
Owner VESA (Video Electronics Standards Organization) DFP Group (Digital Flat Panel Group) and later VESA DDWG (Digital Display Working Group)
Revision / Date 1.0 / Jun 06, 1997 1.0 / Feb 14, 1999 1.0 / Apr 02, 1999
Web page www.vesa.org www.dfp-group.org ddwg.org
Workgroup leader VESA Compaq Intel
Compatibility DVI compatible (adapter possible) P&D and DVI compatible (adapter possible) P&D and DFP compatible (adapter possible)
Transfer protocol TMDS - Transmission Minimizing Differential Signaling (PanelLink) TMDS (PanelLink) TMDS (PanelLink)
Max. Pixel rate (Dot Clock) 165 MHz x 1 165 MHz x 1 165 MHz x 1
Max. number of channels 3 channels (single link) 3 channels (single link) 6 channels (dual link)
Color depths 12 or 24 bit 12 or 24 bit 12 or 24 bit
Max. Resolution SXGA (1280 x 1024) SXGA (1280 x 1024) HDTV (1920 x 1080)
Optional transfer of other signals possible using the same connector Analog VESA video, USB, IEEE 1394-1995 No, only digital video Analog VESA video
Digital Connector P&D-D (30 pin) MDR20 (20 pin) DVI-V (24 pin)
Analog/Digital combination connector P&D-a/d (30+4 pin) No DVI-I (24 + 4 pin)
Connector width 40.6 mm 33.4 mm 37.0 mm


DVI Connectors


A DVI connection can be one of three types - DVI-I, DVI-D or DVI-A.
DVI-I contains both the digital and analog connections, (DVI-D + DVI-A) , it's essentially a combination of DVI-D and DVI-A cables within one cable. The I is for Integrated meaning a combination of both signals D and A.
DVI-D (like DFP or P&D-D (EVC)) is a digital only connection. If both devices being connected support a Digital DVI connection (DVI-I or DVI-D compatible) and are compatible in resolutions, refresh rates and sync, using a DVI-D cable will ensure that you are using a digital connection rather than an analog connection, without playing around with settings to assure this.
DVI-A is not often used on any cables but is in fact a DVI-I Cable with the other side have a HDDB15 Connector.
Dual Link: Dual T.D.M.S. (transition minimized differential signaling) "links". DVI can have up to two TMDS links. Each cable provideo two links each holding three data channels for RGB information with a maximum bandwidth of 165 MHz, which is equal to 165 million pixels per second. Dual-link connections provide bandwidth for resolutions up to 2048 x 1536p.

Single Link: Single T.D.M.S. link. Each link has three data channels for RGB information with a maximum bandwidth of 165 MHz, which is equal to 165 million pixels per second.
Bandwidth for a single-link connection supports resolutions of over 1920 x 1080 at 60 Hz (HDTV).

P&D Connectors

DFP Connectors