
USB to Main Board Dual
11 Inch Leads
Does not have the 2x5 Connector but uses the 2 - 1x5 Connectors in this format.
Pin 1- is the Red Pin.
Pin 10 - is the Red Pin.
Installation Instructions:
Push the 2 1-5 Connectors Side by Side.
Make Sure the Voltages are on the Correct Pin.
Push them into the 2x5 Connector.
11 Inch Leads
Does not have the 2x5 Connector but uses the 2 - 1x5 Connectors in this format.
Pin 1- is the Red Pin.
Pin 10 - is the Red Pin.

Push the 2 1-5 Connectors Side by Side.
Make Sure the Voltages are on the Correct Pin.
Push them into the 2x5 Connector.
PINOUT: Pin Pin 1 VCC(Red) 2 Shell(Black) 3 Data-(White) 4 Ground(Black) 5 Data+(Green) 6 Data+(Green) 7 Ground(Black) 8 Data-(White) 9 Shell(Black) 10 VCC(Red)Watch the +5 Volts VCC(Red)